Fall driving can be unpredictable because of weather changes and the end of daylight saving time. We are all driving and enjoying the beautiful fall colors and need to be safe and aware on the roads this fall. Some great tips for safe fall driving include:
Watch out for leaves: Once leaves become wet, they can present slippery and dangerous driving conditions. Be sure to watch for patches of wet leaves on the road or on road lines. Dry leaves can also present a problem to your vehicle. Avoid parking your vehicle near leaf piles to prevent fires that could start from your vehicle's catalytic converter.
With gas prices high, our drivers are asking, "What can I do to improve gas mileage?" Our answer is that there are quite a few standard maintenance tips that will help you increase gas mileage and your vehicle safety.
One of the first things you should check is tire pressure. There is no one size fits all and it is a pretty easy thing to check at home and fix. On the inside of the driver’s door or door jamb is a plate that indicates the correct tire pressure. Careful – there might be a different pressure for the front and rear tires. Check them at least once a month.
We’ve all heard a car or truck in our neighborhoods that needs a new muffler. But there’s more to the exhaust system than just the muffler. The exhaust system has three main functions:
- To safely get hot exhaust gas from the engine out the tailpipe
- Treats the exhaust to remove harmful pollutants
- Muffle the engine noise
Care and Maintenance Tips Keep Your Car Running in Top-Notch Condition: We’ve compiled our best expert advice, surprising tricks, and car care tips to prolong the life of your automobile!
1. Be patient during the break-in period: You’ve bought your dream car and now you want to make it last at long as possible in top condition. Here are some things to remember as you pull it out of the dealer’s lot:
- During the break-in period, typically the first 1,000 miles (1,600 km), keep your speed under 55 mph (88 kpm) or to the speed recommended by your car’s manufacturer.
- Avoid heavy loads on the drive train, such as towing trailers, and loading the roof rack or trunk with heavy construction materials.
- Do not allow your new car to idle for long periods — this is good advice for the life of your car, but especially during breakin. The oil pressure generated by doing so may not be sending oil to every part of your engine.
- Use only light to medium acceleration, keeping the engine rpms below 3,000 for the first few hours of driving.
In an attempt to boost performance, tire manufacturers analyze the capabilities of their tires under a variety of road conditions and speeds to ensure the safety and durability of their tires. These tests are conducted on all factory-made tires whether they are intended for rain, snow, off-road, performance or fuel conservation. Among the many tests done on new tires is stopping distance. Stopping distance is the span of road that it takes for a vehicle to come to a complete stop.
This simple barrier of accordion-folded paper may look insignificant but it's responsible for providing clean air to your vehicle's cylinders. This is important because air is just as crucial as fuel in the combustion process that powers the engine. Air is drawn through the engine air filter, then the air intake manifold and into the cylinders. There, it mixes with fuel to create the small explosions that power your vehicle.
A dirty engine air filter can prevent the cylinders from drawing in enough air, which throws off the fuel/air mix. This can result in poor fuel economy.